|
magnavox |
14MS2331/17 |
no sound |
|
Philips |
52PFL7422D/37 |
Blue LED comes on for 5 seconds then shuts down. Red LED continuous blink. |
|
Samsung |
LNS4041D , LN84041DX/XAA |
Clicks on and off. Won't power up properly. |
|
MAGNAVOX |
32MD357B/37 |
DEAD |
|
MAGNAVOX |
42MF231D/17 |
Bottom Half picture goes black Touching A5 boards made problem come and go |
|
SHARP |
LC37D4/6U |
NO AUDIO , MENU SEEM TO LOCK UP ON FIX MODE. |
|
EMERSON |
LD200EM8(TV/DVD combo) |
Dead set, faint buzz from SMPS. |
|
philips magnavox |
19MD357B/37 |
no video |
|
SAMSUNG |
HLS5087WX/XAA |
SHUT-DOWN- POWER LIGHT BLINKING |
|
Denon |
DN2600F (Dual CD w/ rack-mount controller) |
Dead. Displays don't glow. |
|
Digitech |
RDS900 (effects processor) |
Effects not working. Low output level. |
|
Magnavox |
32MF337B/27 |
Dead. No power. |
|
Numark |
CDMIX2 (DJ dual CD/mixer) |
One (or both) mechanisms makes scratching, scraping or rubbing sound when you insert a disc. Won't read discs. Skips. |
|
PHILIPS |
27PT6441/37 |
NO VERTICAL ON TURN AS SET WARMS UP FULL VERTICAL WITH RETRACE AT TOP OF PIX |
|
Samsung |
TXR3079WHKX/XA |
dead. |
|
Samsung |
TXR3079WHX/XAA |
Dead-no power up |
|
Samsung |
TXT2782QX/XAA |
Dead, Shuts Down, Wiggly Pix |
|
JVC |
DRMV1SU(DVD/VCR combo) |
Not functional, no main display, no audio output. |
|
PANASONIC |
SAHT70(Receiver/DVD combo) |
Can't read disk, DVD or CD. |
|
GOLDSTAR |
GVRDD1(Dual 8mm/VHS deck) |
VHS deck jams tape. |
|
SONY |
DVPNC600(5-disc DVD/CD changer) |
Can't read disc, reject tray. |
|
MAGNAVOX(PHILIPS) |
20MT4405/17 |
Low and distorted sound, volume not adjustable, click noise at start-up. |
|
Philips |
51PP9100D/37 |
Relay clicks but no start condition |
|
Pioneer |
HD Projection Convergence Menu |
Simple Convergence Menu |
|
Philips plasma |
42FD9954/17S |
shuts down |
|
SAMSUNG |
HLS6186WX/XAA |
Immediate shutdown after lamps lights. |
|
Samsung |
HLN507WX/XAA |
Black "noise" lines in video from all inputs (OSD and internal test patterns were perfect). Lines were mostly horizontal and spaced fairly close together but, as set warms and cools, lines became spaced farther apart and began to stand up vertically and would sometimes eventually start laying over in the opposite direction. |
|
American DJ |
DCDPRO400 (dual CD) |
One laser keeps clicking (trying to focus) but never does find focus lock. |
|
B&K Precision |
1655 (AC power supply/isolation) |
Voltmeter displays too low. R14 calibration pot won't bring the needle high enough. |
|
Alesis |
Quadraverb (effects processor) |
No display. LED level meter stays pegged at max. |