Supertips
| Make | Model | Problem |
|---|---|---|
| SHARP | LC26D4UJ | No audio to internal speakers. |
| SHARP | LC37D6U | No sound, may come back on if set is left off for awhile. |
| SHARP | LC42SB45U | Picture gets inverted intermittently as set warms up. |
| Sharp | LC32D44U | DEAD One flash/second |
| SHARP | LC37D62U | Dead, after a lighting storm. |
| SHARP | LC32SB24U | PIX GOES OUT AFTER A FEW MINUTES |
| sharp | 27US60 | vertical rolls continualy |
| SHARP | LC32D44U | Set will not power up |
| SHARP | LCC3242U | Vertical transparent yellow bar, about 2" wide. |
| Sharp | LC32D40U | Plays 15 minutes then shut down |
| Sharp | LC37D40U | Dead set, No standby LED, No standby 5 Volts |
| SHARP | LC32D62U | TV has backlight but no video or OSD. Sound ok, |
| SHARP | LC26SB24U | White Screen. |
| Sharp | LC15B6U | Dead |
| SHARP | LC46D62U | POWERS UP BLANK SCREEN BACKLIGHT BUT NO VIDEO NO OSD |
| sharp / pioneer | 64LHP4000 / PRO 720HD / PRO 620HD / SD641HD | dead---pwr supply in over current shut down |
| sharp | LC37SH20U | green pixel in picture after warm up the pack ic on board gose bad. |
| SHARP | LC37SB24U | DEAD POWER AND OPC BLINK 1X, POWER 1X |
| SHARP | LC20B2UA | DEAD SET....CUSTOMER SAID SET HAD BEEN FLASHING |
| SHARP | LCG5C32U | DEAD SET |
| sharp | 32US60 | dead |
| Sharp | LCC3242U LCC3742U | Dead |
| Sharp | 19LM100S | Full screen with retrace line |
| sharp | LC32D43U | no power |
| SHARP | 32US50 | Dead set, fuse not blown. |
| SHARP | 19TG30 | Blurry; hard to turn on. |
| SHARP | 21VK100M | RELAY CLICKS WITH NO POWER, STANDBY RED LIGHT BECOMES GREEN WHEN TURN ON THE SET |
| sharp | 25KS180 and 25KS100 and 25KM180 and 25KM100 | dead and fuse is blown |
| SHARP | LC37D4/6U | NO AUDIO , MENU SEEM TO LOCK UP ON FIX MODE. |
| Sharp | 32F630 | Split screen on component input |